Paper
21 March 1989 Flash Lamp Heat Flux Requirements For Thermographic Inspection Of Fiber Composite Laminates
S. D. Cowell, D. D. Burleigh, T. J. Murray
Author Affiliations +
Abstract
A numerical approximation was used to determine the ability of a thermographic imaging camera to detect defects in a panel of graphite epoxy composite while excitation is provided by a specific, commercially available high-energy pulsed xenon flash lamp capable of repetitive pulses of 600 J each. A three-dimensional mathematical model was developed, which simulated the composite panel. The panel consisted of eight plies and included implanted circular defects. Defects modeled included delaminations, overlaps, and teflon inserts. During the first second of the simulation, six heat pulses of 0.2 msec duration were applied to the front surface of the sample. Temperature variations appear on the rear surface of the sample due to the presence of defects inside the panel, which cause the heat to diffuse through the sample at modified rates. A minimum temperature difference of 0.18 °F (0.1 °C) was detectable by the thermal imaging camera. The purpose of this study was to determine whether the purchase of a xenon flash lamp system was warranted for thermographic nondestructive testing (NDT) on graphite epoxy laminates.
© (1989) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
S. D. Cowell, D. D. Burleigh, and T. J. Murray "Flash Lamp Heat Flux Requirements For Thermographic Inspection Of Fiber Composite Laminates", Proc. SPIE 1094, Thermosense XI: Intl Conf on Thermal Infrared Sensing for Diagnostics and Control, (21 March 1989); https://doi.org/10.1117/12.953401
Lens.org Logo
CITATIONS
Cited by 7 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Astatine

Composites

Lamps

Thermal modeling

Nondestructive evaluation

Xenon

Heat flux

Back to Top