Hyper-Rayleigh scattering measurements of magnetite nanoparticles: determination of the first order hyperpolarizability anisotropy

E. S. Gonçalves; R. D. Fonseca; L. De Boni; A. M. Figueiredo Neto

doi:10.1117/12.2510249

1 March 2019 Hyper-Rayleigh scattering measurements of magnetite nanoparticles: determination of the first order hyperpolarizability anisotropy

E. S. Gonçalves, R. D. Fonseca, L. De Boni, A. M. Figueiredo Neto

Author Affiliations +

Proceedings Volume 10941, Emerging Liquid Crystal Technologies XIV; 109410G (2019) https://doi.org/10.1117/12.2510249
Event: SPIE OPTO, 2019, San Francisco, California, United States

Abstract

The hyper-Rayleigh scattering technique was used to determine the first order hyperpolarizability β of magnetic nanoparticles dispersed on colloidal solutions. Pulse trains of mode-locked pulses of 100 ps on an a Q-switcher envelope of 150 ns emitted by a Nd:YAG laser, centered on 1064 nm, were used since this method allows measurements as a function of the incident beam intensity without the need of external elements. In order to determine the procedure to measure second-order optical nonlinearities on magnetic nanoparticles and avoid cumulative effects during the measurements, that lasts between to consecutive pulse trains, the results were studied for different values of the Q-switcher repetition rate, from 5 Hz to 800 Hz. Since cumulative effects were verified for higher values of repetition rates, all measurements were performed at the rate of 30 Hz. Therefore, the first-order hyperpolarizability β was measured in the presence and absence of external magnetic field of magnitude H = 800 G. The linear attenuation spectrum was determined and didn't change with the appliance of magnetic field since large aggregates of nanoparticles were not formed. Nonlinear scattering measurements were performed in the case were the laser light polarization was parallel and perpendicular to the external field lines, employing a half-wave plate to change the light polarization state. In the absence of magnetic field, β_H=0 = 8:5(1)×10^-28 cm⁵/esu, while in their presence of magnetic field, β = 9:8(2)×10^-28 cm⁵/esu and β⊥ = 8:1(1)×10^-28 cm⁵/esu, showing an anisotropy β-β⊥/β of about 17%.

Conference Presentation

Citation Download Citation

E. S. Gonçalves, R. D. Fonseca, L. De Boni, and A. M. Figueiredo Neto "Hyper-Rayleigh scattering measurements of magnetite nanoparticles: determination of the first order hyperpolarizability anisotropy", Proc. SPIE 10941, Emerging Liquid Crystal Technologies XIV, 109410G (1 March 2019); https://doi.org/10.1117/12.2510249

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available