15 November 2018 Research on temperature sensor of double-cone-section cascading interferometer
Author Affiliations +
Proceedings Volume 10964, Tenth International Conference on Information Optics and Photonics; 109642B (2018) https://doi.org/10.1117/12.2505756
Event: Tenth International Conference on Information Optics and Photonics (CIOP 2018), 2018, Beijing, China
Abstract
This type of sensor is manufactured by using the KF-FBT type fusion taper machine to uniformly pull the same single mode optical fiber. Double tapered section cascade type singles mode fiber. When the signal light passes through the concatenation fiber cone, the cladding mode is excited after passing through the first stage cone region. After a certain distance transmission, the second stage cone region interferes with the core mode. The change of the waveform is seen from the spectrometer. When the two cones are bent by 90, the article explores a double-cone-section cascading sensor that is easy to operate and easy to perform multi-point measurements from both theory and experiment. The spectral peak-to-valley contrast of the interference fringe is more obvious, and it can serve as a sensor head to test the ambient temperature. The sensor has a temperature sensitivity of 60 pm/°C.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Chunyu Liu, Xiaopeng Han, Jiuru Yang, and Xudong Zhang "Research on temperature sensor of double-cone-section cascading interferometer", Proc. SPIE 10964, Tenth International Conference on Information Optics and Photonics, 109642B (15 November 2018); doi: 10.1117/12.2505756; https://doi.org/10.1117/12.2505756
PROCEEDINGS
6 PAGES


SHARE
Advertisement
Advertisement
Back to Top