Paper
18 December 2018 Polymer photonic structures for lab-on-a-fiber applications
Author Affiliations +
Proceedings Volume 10976, 21st Czech-Polish-Slovak Optical Conference on Wave and Quantum Aspects of Contemporary Optics; 109760W (2018) https://doi.org/10.1117/12.2518198
Event: 21st Czech-Polish-Slovak Optical Conference on Wave and Quantum Aspects of Contemporary Optics, 2018, Lednice, Czech Republic
Abstract
Lab-on-a-fiber-tip-devices combine the different materials and different configurations (for example photonic structures) to optical fiber tips. We propose, fabricated and experimentally demonstrated a fiber tip device, the 3D polymer photonic structure of Fabry-Perot cavity integrated at the end of the optical fiber. Also, we prepared and experimentally demonstrated a fiber tip device with Bragg reflector integrated at the end of the optical fiber. Both structures, the Bragg’s reflector and the Fabry-Perot cavity, were created in IP Dip polymer cylinder with a diameter like a diameter of an optical fiber which is advantageous for integration. Layers of structures consist a material with refractive index 1.5 and air. In addition, a method of transferring and bonding of a photonic structure at the end of the optical fiber is described. In all investigated interval of wavelengths there is good agreement between measured and calculated reflection spectra.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ivan Martincek, Matej Goraus, and Daniel Kacik "Polymer photonic structures for lab-on-a-fiber applications", Proc. SPIE 10976, 21st Czech-Polish-Slovak Optical Conference on Wave and Quantum Aspects of Contemporary Optics, 109760W (18 December 2018); https://doi.org/10.1117/12.2518198
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical fibers

Polymers

Reflectors

Epoxies

Lithography

Reflectivity

Back to Top