Paper
31 December 2018 A parametric study on the frequency-domain response of multi-resonant frequency selective surfaces with loop-type unit cells
Adrian Androne, Razvan D. Tamas
Author Affiliations +
Proceedings Volume 10977, Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies IX; 109772Y (2018) https://doi.org/10.1117/12.2324698
Event: Advanced Topics in Optoelectronics, Microelectronics and Nanotechnologies IX, 2018, Constanta, Romania
Abstract
In this paper, resonance frequency corresponding to the frequency selective surfaces with single or multiple loop type element unit cells was analyzed. Since the frequency response depends on the unit cell geometry, the analysis was based on simulation using the CST Microwave Studio software for various geometric parameter values. Thus, the frequency responses obtained by changing the geometry of the copper lines, the copper thickness or the substrate thickness, and the angle of incidence or the dielectric constant respectively, were compared and discussed.
© (2018) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Adrian Androne and Razvan D. Tamas "A parametric study on the frequency-domain response of multi-resonant frequency selective surfaces with loop-type unit cells", Proc. SPIE 10977, Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies IX, 109772Y (31 December 2018); https://doi.org/10.1117/12.2324698
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Copper

FSS based metamaterials

Dielectrics

Electronics

Reflection

Telecommunications

Information technology

Back to Top