Translator Disclaimer
7 March 2019 Review of the opaque coolant barrier removal techniques for in-process form profile optical measurement
Author Affiliations +
Proceedings Volume 11053, Tenth International Symposium on Precision Engineering Measurements and Instrumentation; 1105304 (2019) https://doi.org/10.1117/12.2517179
Event: 10th International Symposium on Precision Engineering Measurements and Instrumentation (ISPEMI 2018), 2018, Kunming, China
Abstract
In-process measurement can provide feedback for control of workpiece precision in terms of size, form error, and roughness. It can be used for precision control of a machining process, therefore to improve productivity and reduce defect rates. Optical measurement methods have greater advantages in the in-process form profile measurement systems due to their non-contact type and high precision. However, use of opaque coolant in precision machining will introduce an opaque barrier problem, making the workpiece surface y(x, z) inaccessible to the optical measurement devices. To solve this problem, several approaches, including the water beam approach, the single air beam approach, the multiple air beam approach, and the dual coolant displacing medium method, are examined in terms of coolant removal capability, level of acceptance to surface complexity, flow rate and velocity of the coolant displacing media, and also errors induced by the coolant removal methods. The results of the study show that the multiple air beam method and the dual coolant displacing media method are more advantageous than the other methods.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
J. Zhu and Y. Gao "Review of the opaque coolant barrier removal techniques for in-process form profile optical measurement", Proc. SPIE 11053, Tenth International Symposium on Precision Engineering Measurements and Instrumentation, 1105304 (7 March 2019); https://doi.org/10.1117/12.2517179
PROCEEDINGS
7 PAGES


SHARE
Advertisement
Advertisement
Back to Top