Translator Disclaimer
21 June 2019 In-plane deformation gradient measurement using common-path spatial phase shift shearography
Author Affiliations +
The spatial phase shifting digital speckle pattern shearing interferometry (DSPSI) system has been widely used to determine map of deformation. In this paper a common-path DSPSI setup is introduced for in-plane strain measurement under dynamic loading, using two laser beams with different wavelengths that symmetrically illuminate the test object, and a single detector. The simplicity, stability and efficiency of the arrangement are provided using a glass plate as a shearing device which is capable of tuning the sensitivity continuously. The phase is recovered from a single frame by the Fourier method. In this setup the spatial carrier frequencies can be adjusted independent of the lateral shearing amount. Ultimately, the desired field of view can easily be achieved by simple imaging optics. To validate the feasibility and the flexibility of our technique, the proposed setup is used to evaluate the strain map of an aluminum plate which is deformed under dynamic stress in its plane. Experimental results are presented and discussed.
Conference Presentation
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Helia Hooshmand-Ziafi, Khosrow Hassani, and Masoomeh Dashtdar "In-plane deformation gradient measurement using common-path spatial phase shift shearography", Proc. SPIE 11060, Optical Methods for Inspection, Characterization, and Imaging of Biomaterials IV, 1106008 (21 June 2019);

Back to Top