Translator Disclaimer
Paper
30 August 2019 Material selection for an achromatic and athermal design using the factor of determination on optical glasses
Author Affiliations +
Abstract
This study presents a new method for selecting a pair of optical glass and housing material to achromatize and athermalize a lens system, by use of the factor of determination for material selection. To effectively obtain an optimum combination for materials, we newly propose the sequential material selection method by introducing the factor of determination for material selection, which depends on the level of contribution to correct these aberrations and the availability to be used as a suitable material. Even though there are many cases for material combinations, we can sequentially identify the best pair of glass and housing materials by checking the factor of determination. Using this design approach, we efficiently obtain an achromatic and athermal system through an optimum combination of materials, over the specified ranges in temperature and waveband.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tae-Yeon Lim, Kum-Ho Kim, and Sung-Chan Park "Material selection for an achromatic and athermal design using the factor of determination on optical glasses", Proc. SPIE 11104, Current Developments in Lens Design and Optical Engineering XX, 111040R (30 August 2019); https://doi.org/10.1117/12.2528691
PROCEEDINGS
8 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

Apochromatic correction of hybrid lens
Proceedings of SPIE (March 07 2001)
New Compact Optical Systems For Projection Televisions
Proceedings of SPIE (April 20 1987)
Hybrid achromatic spectacle lens
Proceedings of SPIE (November 21 2003)
Design of zoom lens with binary optics
Proceedings of SPIE (October 05 1995)
Systematic design of two-group refractive zoom lenses
Proceedings of SPIE (August 23 1996)
Zoom lens design
Proceedings of SPIE (October 14 2005)

Back to Top