Presentation + Paper
9 September 2019 Extreme ultraviolet laser ablation of solid targets
Author Affiliations +
Abstract
A capillary laser with output in the extreme ultra-violet at wavelength 46.9 nm is used to ablate solid targets of parylene- N (CH), PMMA, aluminum and gold. We summarize results obtained using different focusing optics: a Fresnel zone plate, an off-axis spherical multi-layer mirror and on-axis multi-layer and gold mirrors. The Fresnel zone plate has a small aperture and focuses a small fraction of the laser energy to a small diameter (< 1 μm) with peak intensities 6 x 109Wcm-2. The off-axis spherical multi-layer mirror allows for a measurement of the transmission of the laser through thin targets, but the off-axis geometry produced an aberrated focus. The on-axis multi-layer mirror allows focusing to intensities of approximately 5 x 1010 Wcm-2 with a cylindrically symmetric focus.
Conference Presentation
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
G. J. Tallents, S. A. Wilson, J. Lolley, V. Aslanyan, A. West, A. K Rossall, E. Solis-Meza, E. Wagenaars, C. S. Menoni, and J. J. Rocca "Extreme ultraviolet laser ablation of solid targets", Proc. SPIE 11111, X-Ray Lasers and Coherent X-Ray Sources: Development and Applications XIII, 1111106 (9 September 2019); https://doi.org/10.1117/12.2528736
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser ablation

Mirrors

Plasma

Capillaries

Extreme ultraviolet

Spherical lenses

Laser applications

RELATED CONTENT

Optical discharge in laser cavity
Proceedings of SPIE (December 06 2013)
EUV off-axis focusing using a high harmonic source
Proceedings of SPIE (April 30 2009)
Helium-Cadmium Lasers For High Speed Writing Applications
Proceedings of SPIE (September 20 1982)

Back to Top