Translator Disclaimer
Presentation + Paper
9 September 2019 Raman laser spectrometer flight model assembly and integration verification: end-to-end functional tests for thermal strap assembly procedure redefinition
Author Affiliations +
Abstract
Raman Laser Spectrometer (RLS) is one of the Pasteur Payload instrument of the ExoMars 2020 mission, within the ESA’s Aurora Exploration Program. RLS is mainly composed by SPU (Spectrometer Unit), iOH (Internal Optical Head), and ICEU (Instrument Control and Excitation Unit), and will analyse Mars surface and sub-surface crushed samples by Raman spectroscopy. For the RLS Flight Model (FM) verification campaign, an end-to-end quick functional test was developed to evaluate the instrument performances stability. This test consists on a comparison of the centre pixel and the FWHM (Full Width at Half Maximum) of a set of Ne calibration lamp peaks, and was decided to be done before and after ever risky activity (transport, thermal tests, etc.) In the course of the end-to-end functional test carried out on RLS FM as part of the pre-delivery checks, an increment on the FWHM calibration lamp peaks was observed. Such performance variation was also noted to be dependent on the way the SPU thermal strap was assembled and the environmental conditions (P and T) in which the spectra were acquired. For that reason, a new SPU thermal strap assembly procedure was decided to be designed in order to ensure no extra negativeeffect was going to appear during the RLS FM installation on the ALD (Analytical Laboratory Drawer) and the instrument flight operation. In this paper, a deep exploration of the conditions in which such “de-focus” (probably due to an excessive thermal gradient between SPU structure and CCD) appears is carried out, demonstrating that the new thermal strap assembly procedure minimizes an incidental extra de-focus appearance during RLS installation on the ALD.
Conference Presentation
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
J. Rodríguez-Prieto, G. Ramos , A. G. Moral , C. P. Canora, F. Rull, T. Belenguer, C. Quintana, J. Zafra, J. Cabrero, A. Santiago, and D. Escribano "Raman laser spectrometer flight model assembly and integration verification: end-to-end functional tests for thermal strap assembly procedure redefinition", Proc. SPIE 11115, UV/Optical/IR Space Telescopes and Instruments: Innovative Technologies and Concepts IX, 1111505 (9 September 2019); https://doi.org/10.1117/12.2530552
PROCEEDINGS
12 PAGES + PRESENTATION

SHARE
Advertisement
Advertisement
Back to Top