Translator Disclaimer
20 November 2019 Quasi-distributed temperature sensor based on cascaded quantum-dot fiber
Author Affiliations +
Abstract
A novel quasi-distributed fiber temperature sensor based on the cascaded quantum dot fibers (QDFs) is proposed in this paper. The cascaded QDFs are fabricated by the 3D printing technology and can be divided into two parts QDF1 and QDF2. When the excitation light is coupled into the fiber, the QDF1 emits the 630nm fluorescence and the QDF2 emits the 530nm fluorescence. Because the fluorescence peaks will change with the temperature linearly, it can be used as the fiber temperature sensor. In the experiment, by controlling the temperature at each QDF, the sensor realizes the temperature measurement at different position. The sensitivity of the sensor at different position is 0.15nm/°C and 0.153nm/°C, respectively. The results verify the feasibility of the structure for distributed temperature sensing. The spatial resolution is 1.8mm, which is limited by the length of the printed QDF.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zixiang Zhuang, Guosheng Zhang, Yan Wang, Wenyu Du, Weidong Luo, Zhigang Cao, Jiping Lin, Jun Zhu, Shenglai Zhen, and Benli Yu "Quasi-distributed temperature sensor based on cascaded quantum-dot fiber", Proc. SPIE 11191, Advanced Sensor Systems and Applications IX, 111910Y (20 November 2019); https://doi.org/10.1117/12.2537304
PROCEEDINGS
7 PAGES


SHARE
Advertisement
Advertisement
Back to Top