Feasibility study on autogenously lap joint between non-ferrous metal alloys using low power fiber laser

Shamini Janasekaran; Nashrah Hani Jamadon; Farazila Yusof

doi:10.1117/12.2542500

16 October 2019 Feasibility study on autogenously lap joint between non-ferrous metal alloys using low power fiber laser

Shamini Janasekaran, Nashrah Hani Jamadon, Farazila Yusof

Author Affiliations +

Proceedings Volume 11205, Seventh International Conference on Optical and Photonic Engineering (icOPEN 2019); 1120503 (2019) https://doi.org/10.1117/12.2542500
Event: Seventh International Conference on Optical and Photonic Engineering (icOPEN 2019), 2019, Phuket, Thailand

Abstract

Dissimilar joining between metals has been always a desired need by many industries mainly on automotive. The urge to replace the conventional joining methods to a flexible technique such as fiber laser beam welding has created the demand for more feasibility studies on dissimilar metals. Despite of their thermal coefficient differences in them, the time reduction and higher productivity using fiber laser welding has led to studies on dissimilar nickel alloy, Inconel 600 and aluminum alloy; AA2024-0. Both these metals were laser welded at overlap configuration without any filler in between at a low power Yb-fiber laser. The feasibility studies proved optimum welding speed can influence the joining possibilities and the results can be investigated using optical microscopy (OM). The cross-section of the joints revealed that the fusion zone (FZ) and heat affected zones (HAZ) are wider when welding speed decreases with lower laser power. The energy from low power fiber laser is able to melt the parent metals forming a molten pool to allow liquid metal to flow smoothly between top and bottom layers. It can be concluded that further studies on laser welding with a low laser power between non-ferrous metals are possible.

Citation Download Citation

Shamini Janasekaran, Nashrah Hani Jamadon, and Farazila Yusof "Feasibility study on autogenously lap joint between non-ferrous metal alloys using low power fiber laser", Proc. SPIE 11205, Seventh International Conference on Optical and Photonic Engineering (icOPEN 2019), 1120503 (16 October 2019); https://doi.org/10.1117/12.2542500

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available

Members: $17.00

Non-members: $21.00 ADD TO CART

PROCEEDINGS
6 PAGES

DOWNLOAD PAPER SAVE TO MY LIBRARY

GET CITATION

RIGHTS & PERMISSIONS

Get copyright permission Get copyright permission on Copyright Marketplace

KEYWORDS

Laser welding

Aluminum

Metals

Fiber lasers

Nickel

Resistance

Manufacturing

Show All Keywords

Keywords/Phrases

Search In:

Publication Years