Paper
22 December 1989 Development Of Materials For Nonlinear Optical Information Processing Devices
Andrew C. Walker, Brian S. Wherrett, S. Desmond Smith
Author Affiliations +
Proceedings Volume 1127, Nonlinear Optical Materials II; (1989) https://doi.org/10.1117/12.961392
Event: 1989 International Congress on Optical Science and Engineering, 1989, Paris, France
Abstract
Research directed at two-dimensional optical information processing requires large arrays of binary logic elements with moderate power demand. To minimise power consumption intermediate switch times of ≤ 1 μs would appear to be optimum. A short-term target is to develop a 104 element array of such switches with ≤ 1 watt power consumption. This puts specific demands on the nonlinear materials being exploited. For example, those devices based on optoelectronic nonlinearities need high quality material with long carrier lifetimes. A novel time-resolved photoluminescence microscope spectrometer has been developed for measuring such lifetimes. The alternative nonlinear interference filter (NLIF) devices, based on optothermal nonlinearities, also look promising in this context. Because of the need for high quality structurally stable thin-film material, a new UHV molecular beam deposition (MBD) facility has been set up to permit production of low damage threshold, stable dielectric layers. Good thickness uniformity has been demonstrated over large, 100 mm diameter, substrates.
© (1989) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Andrew C. Walker, Brian S. Wherrett, and S. Desmond Smith "Development Of Materials For Nonlinear Optical Information Processing Devices", Proc. SPIE 1127, Nonlinear Optical Materials II, (22 December 1989); https://doi.org/10.1117/12.961392
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Switches

Model-based design

Luminescence

Gallium arsenide

Optoelectronics

Picosecond phenomena

Molecular beams

Back to Top