Translator Disclaimer
Paper
25 February 2020 Vector curvature sensor based on a single fiber Bragg grating
Author Affiliations +
Abstract
A vector curvature sensor based on a single fiber Bragg grating (FBG) is proposed and experimentally demonstrated. The sensor is easily fabricated by encapsulating an FBG on a thin steel plate with ultraviolet glue. When the FBG deviates from the neutral plane, its effective refractive index and grating constant are changed by bending, therefore, the sensor can realize curvature measurement. Due to the opposite stress direction on the two sides of the neutral plane during bending, the sensor can realize vector measurement of curvature. The curvature sensitivity of the sensor in convex and concave bending is 558.42 pm/m-1 and -818.09 pm/m-1, respectively. This sensor has the advantage of simple structure, low cost, and easy industrial production. It has potential applications in engineering health monitoring and deformation measurement.
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yundong Zhang, Fuxing Zhu, Yanchen Qu, Ying Guo, Huaiyin Su, Kaiyue Qi, and Weiguo Jiang "Vector curvature sensor based on a single fiber Bragg grating", Proc. SPIE 11296, Optical, Opto-Atomic, and Entanglement-Enhanced Precision Metrology II, 112961N (25 February 2020); https://doi.org/10.1117/12.2552696
PROCEEDINGS
7 PAGES


SHARE
Advertisement
Advertisement
Back to Top