Translator Disclaimer
Paper
18 December 2019 A type of lidar sensor uses a 1645 nm laser using TiS2 as a saturable absorber
Author Affiliations +
Proceedings Volume 11333, AOPC 2019: Advanced Laser Materials and Laser Technology; 1133307 (2019) https://doi.org/10.1117/12.2539002
Event: Applied Optics and Photonics China (AOPC2019), 2019, Beijing, China
Abstract
A laser radar used in an automatic driving system was designed to operate normally in rainy and foggy weather while ensuring eye safety. The laser radar uses the principle of triangulation to measure the distance while adjusting the position of the focused light source by the beam expanding and focusing module. The laser radar used a home-made passively Q-switched Er:YAG laser that used a home-made TiS2 as a saturable absorber with an operating wavelength of 1645 nm. At an absorption pump power of 10.54 W, the passively Q-switched Er:YAG laser had a pulse repetition frequency of 37 kHz, a maximum average output power of 1.44 W, a pulse duration of 1.1 μs, and a pulse energy of 36.39 μJ.
© (2019) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Guoqiang Li, Chi Wu, and Juan Su "A type of lidar sensor uses a 1645 nm laser using TiS2 as a saturable absorber", Proc. SPIE 11333, AOPC 2019: Advanced Laser Materials and Laser Technology, 1133307 (18 December 2019); https://doi.org/10.1117/12.2539002
PROCEEDINGS
6 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

The hazard of accommodation and scanning LIDARs
Proceedings of SPIE (May 28 2018)
Optical signatures for autonomous mobility
Proceedings of SPIE (May 06 2009)
Development of an eyesafe infrared aerosol lidar
Proceedings of SPIE (December 17 1992)
High-efficiency near- and mid-IR intra-cavity OPO
Proceedings of SPIE (May 04 2010)
Laser communications for covert links
Proceedings of SPIE (August 06 1993)

Back to Top