You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
18 December 2019An assembly method for large-aperture laser beam reduction system
The paper presents a method based on the principle of auto-collimating to assemble the large-aperture laser beam reduction system. The method solves the problem of using fiber laser, plane mirror and Hartman wavefront sensor to realize the precision assembling of the large-aperture laser beam reduction system in the absence of large-diameter standard light source. Using the method, The large-aperture laser beam reduction system is successfully assembled in the big science project. And the technical index of the system is tested and the uncertainty is analyzed. The near field modulation degree is 1.03, the contrast is 0.025, the wavefront distortion is 0.476λ(λ=1053nm), and the system meets the requirements of the engineering index.
The alert did not successfully save. Please try again later.
Xiang ke Zheng, Shi fa Kang, Xi hong Fu, Hua Li, Ya xuan Duan, Hong guang Li, "An assembly method for large-aperture laser beam reduction system," Proc. SPIE 11338, AOPC 2019: Optical Sensing and Imaging Technology, 113381M (18 December 2019); https://doi.org/10.1117/12.2544149