You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
13 November 2019The compensation of deformation measurement in large field of view based on digital speckle pattern interferometry
Digital speckle pattern interferometry (DSPI) is a high-precision measurement method for measuring the surface deformation of an object. Compared with other measurement techniques, it has the advantages of full-field measurement, real-time, non-contact, high precision and high sensitivity, which has made the technology widely concerned by the measurement community since its birth. However, the application calculation of most of the existing digital speckle interference is based on the paraxial and approximate vertical calculations, ignoring the large fluctuation range of the angle between the laser illumination direction and the CCD observation direction. It makes the measurement error of large field of view larger when the size of the object is large . Therefore, when measuring a large field of view, it is necessary to correct the existing measurement formula. This paper proposes a new method for applying digital speckle interference to large field of view measurement. Based on the basic principle of digital speckle interferometry, the corresponding compensation coefficient is obtained through mathematical relationship to compensate the measurement result of large field of view.
The alert did not successfully save. Please try again later.
Fengqing Bao, Weijie Chen II, Qihan Zhao III, Shuangle Wu IV, Yonghong Wang, "The compensation of deformation measurement in large field of view based on digital speckle pattern interferometry," Proc. SPIE 11343, Ninth International Symposium on Precision Mechanical Measurements, 113430G (13 November 2019); https://doi.org/10.1117/12.2547431