You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
13 November 2019Design and implementation of online measurement and control system for mold cavity temperature
In order to achieve high process efficiency and ideal quality for thermoplastic products, the accuracy of temperature measurement and the response speed of temperature control are critical. A set of on-line measurement and control system for mold cavity temperature was designed and implemented. The system consists of two parts: the temperature measurement and control instrument and the PC monitoring software. The instrument uses each cavity as the monitoring point, and uses the thermocouple to measure the temperature. Through the ADC conversion, the cavity temperature can be obtained, and the temperature can be adjusted in a suitable range by controlling the heating and cooling valves of each cavity. The instrument transmits the measured temperature data and the valve status of each channel to the monitoring software via WiFi. The software draws the temperature curve, stores and judges the temperature data, and issues an alarm if it is not within the threshold range. The system can simultaneously monitor 12 cavities. The measurement temperature is between 0-250 °C, the maximum acquisition speed of the system single channel is 0.02 seconds.
The alert did not successfully save. Please try again later.
Hui Zhang, Rongguang Yang, Liyan Wang, Jie Dai, Yang Zhang, "Design and implementation of online measurement and control system for mold cavity temperature," Proc. SPIE 11343, Ninth International Symposium on Precision Mechanical Measurements, 113430M (13 November 2019); https://doi.org/10.1117/12.2548256