You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
13 November 2019Micro-milling cutter precise tool setting technology based on discharge sensing
In micro-milling, the diameter of the micro-milling cutter is smaller than tens of microns, making it difficult to achieve precise positioning with the workpiece, which affects the machining accuracy and the safety of the micro-milling cutter. To solve these problems, the coordinate system has been analyzed. A micro-milling precise automatic tool setting technology has been proposed, which based on the micro-energy pulse discharge sensing principle. A tool setting scheme is proposed to determinate the Central coordinates of workpiece, which is realized by repeating automatically the precise sense from four directions. Experiment is carried out to verify the feasibility and correctness of the technology by analyzing the perceived results.
The alert did not successfully save. Please try again later.
Bo Hu, Yongbin Zhang, Jian Li, Weiran Yuan, Jianyuan Li, "Micro-milling cutter precise tool setting technology based on discharge sensing," Proc. SPIE 11343, Ninth International Symposium on Precision Mechanical Measurements, 1134322 (13 November 2019); https://doi.org/10.1117/12.2551662