Translator Disclaimer
Paper
28 April 2020 Ultrasonic evaluation of polymer additively manufactured parts for defect inspection and structural integrity assessment
Author Affiliations +
Abstract
Quality assurance and structural integrity evaluation are the crucial parts of the successful design and service of additively manufactured (AM) components. Discontinuities and flaws in AM parts can affect the mechanical properties of a component during manufacturing and service. It is very important to identify the discontinuities in AM parts in terms of location, size, and geometrical properties using nondestructive testing (NDT) techniques. Existing research in both mechanical testing and nondestructive evaluation involves developing methods for characterizing and inspecting AM components as the use of such materials continues to rise. Although there exist relatively mature ultrasonic inspection techniques for defect detection, AM polymer components face the challenge of considerable internal inhomogeneities caused by the design and printing strategies. It has been shown that the ultrasonic signals are very sensitive to the material inhomogeneities, consequently the reflection/diffractions from the defects will be significantly influenced and defect detection will be very challenging. This work aims to present the potentials and challenges in ultrasonic detection of defects in polymer AM parts. Air-coupled ultrasonic tests to be demonstrated and followed by results and discussions. The role of porosity on detectability in the ultrasonic NDT tests is described and a possible way for attenuation assessment is demonstrated. Finally, the effect of AM part inhomogeneities on detection probability of seeded defects with different sizes and locations in AM parts is presented.
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jinsun Lee, Mostafa Hasanian, Hossain Saboonchi, Maggie Baechle, and Hossein Taheri "Ultrasonic evaluation of polymer additively manufactured parts for defect inspection and structural integrity assessment", Proc. SPIE 11380, Nondestructive Characterization and Monitoring of Advanced Materials, Aerospace, Civil Infrastructure, and Transportation XIV, 113801Q (28 April 2020); https://doi.org/10.1117/12.2572463
PROCEEDINGS
11 PAGES


SHARE
Advertisement
Advertisement
Back to Top