Paper
28 November 1989 Rapid Thermal Annealing Of S-Implanted Semi-Insulating InP
Parimala Karighattam, D. A. Thompson
Author Affiliations +
Proceedings Volume 1144, 1st Intl Conf on Indium Phosphide and Related Materials for Advanced Electronic and Optical Devices; (1989) https://doi.org/10.1117/12.962018
Event: First International Conference on Indium Phosphide and Related Material for Advanced Electronic and Optical Devices, 1989, Norman, OK, United States
Abstract
Semi-insulating Fe-doped InP samples have been implanted with 60 keV S+ ions at 300 K, over the dose range of 5x1012 to 5x1015 ions cm-2. Subsequent to implantation, they have been annealed, without encapsulation, using Rapid thermal annealing procedures at temperatures ranging from 650-800°C and for times 2-50 s. The samples have been analysed using Photoluminescence and Hall effect/Conductivity measurements in order to establish the anneal conditions necessary to produce best dopant activation. Results indicate the best anneal condition to be ~800°C for 10 s. Maximum electrical activations ~66% and carrier concentrations up to 3x1019 cm-3 have been obtained. PL spectra of S+ implanted and annealed InP show new features at 1.378-1.380 eV that can be ascribed to S impurities. Samples implanted with lx1014 cm-2 and 1x1015cm-2 (S+Si) ions have also been studied.
© (1989) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Parimala Karighattam and D. A. Thompson "Rapid Thermal Annealing Of S-Implanted Semi-Insulating InP", Proc. SPIE 1144, 1st Intl Conf on Indium Phosphide and Related Materials for Advanced Electronic and Optical Devices, (28 November 1989); https://doi.org/10.1117/12.962018
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
Back to Top