Design update of the central wheel mechanism

R. Romp; A. W. Janssen; P. Kunst; R. Navarro; N. Tromp; V. Hörmann; S. Rabien; R. Davies

doi:10.1117/12.2561434

13 December 2020 Design update of the central wheel mechanism

R. Romp, A. W. Janssen, P. Kunst, R. Navarro, N. Tromp, V. Hörmann, S. Rabien, R. Davies

Proceedings Volume 11451, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation IV; 114513R (2020) https://doi.org/10.1117/12.2561434
Event: SPIE Astronomical Telescopes + Instrumentation, 2020, Online Only

Conference Poster

Abstract

We present an update of the design of the Central Wheel Mechanism (CWM), a subsystem of the MICADO instrument for the Extremely Large Telescope (ELT)¹. The CWM consists of a Filter Wheel Mechanism (FWM) with two Filter wheels, the Pupil Wheel Mechanism (PWM) with one Pupil wheel and the Atmospheric Distortion Corrector (ADC). The CWM has a diameter of about 1.5 meter. Challenges in the mechanical design work are focused on fitting all the components in the available design volume and ensuring that the accuracy and repeatability requirements are met. The mechanisms should work in a cryogenic environment for an intended lifetime of 10 years and survive transport and seismic conditions. Additionally the system has to cool and warm-up properly. The most noticeable update since the PDR² is a self-contained ring assembly of a connected FWM and PWM that is suspended to the MICADO instrument using flexible supports. The arrangement of these supports creates a point of shrinkage at the optical position which is off-axis from the cryostat center. An alignment tool will guarantee a position accuracy within 50 μm for both the ADC as well as the Pupil masks that are mounted after the system is integrated into the instrument. The most sensitive bearings are protected from shock loads by a system that limits their load carrying capability by transferring the excess load to bumpers. These bumpers do not affect the repeatability of the system.

Citation Download Citation

R. Romp, A. W. Janssen, P. Kunst, R. Navarro, N. Tromp, V. Hörmann, S. Rabien, and R. Davies "Design update of the central wheel mechanism", Proc. SPIE 11451, Advances in Optical and Mechanical Technologies for Telescopes and Instrumentation IV, 114513R (13 December 2020); https://doi.org/10.1117/12.2561434

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available