Translator Disclaimer
Paper
17 April 2020 Surface performance evaluation method of sawing natural diamond
Author Affiliations +
Proceedings Volume 11455, Sixth Symposium on Novel Optoelectronic Detection Technology and Applications; 114552N (2020) https://doi.org/10.1117/12.2563955
Event: Sixth Symposium on Novel Photoelectronic Detection Technology and Application, 2019, Beijing, China
Abstract
The surface properties of the natural diamond cutting surface directly affect the processing or use of its subsequent order, but there is no complete and systematic evaluation method for the evaluation of surface properties.The natural diamond cutting surface with good surface quality was obtained by sawing, and the natural diamond cutting surface was detected and analyzed by using optical microscope, scanning electron microscope, roughness measuring instrument and X-ray diffractometer.Through the analysis and comparison of the detection results, the surface properties of the natural diamond cutting surface were evaluated from the angles of roughness, microcrystalline strain and interplanar spacing. Finally,a complete set of methods for evaluating the surface properties of natural diamond cutting surfaces was concluded.
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Guangfeng Shi, Wang Fu, Ziyang Wei, Shukun Wang, Dongdong Han, and Xu Han "Surface performance evaluation method of sawing natural diamond", Proc. SPIE 11455, Sixth Symposium on Novel Optoelectronic Detection Technology and Applications, 114552N (17 April 2020); https://doi.org/10.1117/12.2563955
PROCEEDINGS
11 PAGES


SHARE
Advertisement
Advertisement
Back to Top