Presentation + Paper
7 October 2020 Damage probability versus damage density: analysis from tests using small beams versus large beams
Author Affiliations +
Abstract
The paper aims to compare the results obtained with the same laser source with a large beam and with small beams. These latest were shaped from phase objects implemented to obtain several small beams from a single larger beam. The consistency of the results from both sets of measurements is shown. It validates the assumptions made and the specific mathematical treatments implemented to establish the link between the two approaches. It also validates and strengthens the approach developed from the rasterscan procedure used to measure damage densities from the scanning with beams of small dimensions. This shows that small beam tests are reasonably representative of tests carried out with large beams.
Conference Presentation
© (2020) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Laurent Lamaignère, Matthieu Veinhard, Florian Tournemenne, Charles Bouyer, Romain Parreault, Roger Courchinoux, Jean-Yves Natoli, Claude Rouyer, and Stéphane Bouillet "Damage probability versus damage density: analysis from tests using small beams versus large beams", Proc. SPIE 11514, Laser-induced Damage in Optical Materials 2020, 115140E (7 October 2020); https://doi.org/10.1117/12.2571834
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Analytical research

Beam shaping

Laser induced damage

Statistical analysis

Laser damage threshold

Laser sources

Resistance

Back to Top