You have requested a machine translation of selected content from our databases. This functionality is provided solely for your convenience and is in no way intended to replace human translation. Neither SPIE nor the owners and publishers of the content make, and they explicitly disclaim, any express or implied representations or warranties of any kind, including, without limitation, representations and warranties as to the functionality of the translation feature or the accuracy or completeness of the translations.
Translations are not retained in our system. Your use of this feature and the translations is subject to all use restrictions contained in the Terms and Conditions of Use of the SPIE website.
22 May 2020Mode converter based on ring resonator for integrated photonics
In this paper we propose design of the mode converter for implementing in photonic integrated circuits. Mode converter consists of single-mode ring resonator, single-mode access waveguide and multimode access waveguide, and we propose using of vertical coupling, i.e. locating waveguides under the ring with little gap. Using finite difference time domain simulation we showed high efficiency of proposed device design. We showed dependence of the device performance on the shape of multimode waveguide coupler: straight waveguide provide low level of mode crosstalk, “pulley coupling” scheme with small arc angle (about 13 degrees) provide strong wavelength selectivity. Devices with proposed design is suitable for SDM-WDM systems.
The alert did not successfully save. Please try again later.
Ruslan V. Kutluyarov, Vladimir S. Lyubopytov, Denis M. Fatkhiev, Albert Kh. Sultanov, "Mode converter based on ring resonator for integrated photonics," Proc. SPIE 11516, Optical Technologies for Telecommunications 2019, 1151610 (22 May 2020); https://doi.org/10.1117/12.2566520