Processing multidimensional signals of triangulation optical sensors for recognition railway objects

Rinat R. Diyazitdinov

doi:10.1117/12.2566307

Translator Disclaimer

22 May 2020 Processing multidimensional signals of triangulation optical sensors for recognition railway objects

Rinat R. Diyazitdinov

Author Affiliations +

Proceedings Volume 11516, Optical Technologies for Telecommunications 2019; 115161E (2020) https://doi.org/10.1117/12.2566307
Event: XVII International Scientific and Technical Conference "Optical Technologies for Telecommunications", 2019, Kazan, Russian Federation

Abstract

The triangulation optical sensors are widespread at industry. In particular, they are used at development of railway diagnostic system. The output signal of this sensor is multidimensional point sequences. At every single moment the signal defines the counter of target object. In the case it is rail counter. The one of important problem is method‘s development for recognition railway objects is the railway switch. The recognition method was shown at article. It is based on measurement side point of rail. At the area of switch triangulation optical sensors recognition at the same time two rails. The processing of railway parts allows recognition this situation.

Citation Download Citation

Rinat R. Diyazitdinov "Processing multidimensional signals of triangulation optical sensors for recognition railway objects", Proc. SPIE 11516, Optical Technologies for Telecommunications 2019, 115161E (22 May 2020); https://doi.org/10.1117/12.2566307

ACCESS THE FULL ARTICLE