17 January 1990 A New Streak-Tube Design With A High Signal-To-Noise Ratio And Fast Time Response
Author Affiliations +
Abstract
A new streak tube is in the preliminary design and review phase. Modeled after the newly designed microchannel-plate (MCP)-based x-ray-framing camera at the Lawrence Livermore National Laboratory (LLNL), this streak tube incorporates an MCP at the light input to amplify the signal before noise is introduced into the system. The signal-to-noise ratio of the streak tube is directly dependent on the gain setting of the MCP and can thus be greater than 1000:1. Temporal resolution will be about 30 ps, and the dynamic range should be greater than 500:1. Another tube of the same design, but employing a photocathode instead of the photocathode/MCP combination, has been studied briefly. With some minor modifications, it should be possible to achieve a dynamic range of about 20 with this version of the design, and to reduce the magnification to about 1 and improve the time response to 150 fs.
© (1990) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Mark W. Bowers, Mark W. Bowers, } "A New Streak-Tube Design With A High Signal-To-Noise Ratio And Fast Time Response", Proc. SPIE 1155, Ultrahigh Speed and High Speed Photography, Photonics, and Videography '89: Seventh in a Series, (17 January 1990); doi: 10.1117/12.962437; https://doi.org/10.1117/12.962437
PROCEEDINGS
5 PAGES


SHARE
RELATED CONTENT

Theoretical Analysis Of Synchroscan Streak Camera
Proceedings of SPIE (June 07 1989)
Streak cameras applied to spatial chronometry
Proceedings of SPIE (January 01 1992)
Universal Streak Camera
Proceedings of SPIE (February 01 1985)
Characterization Of Photon-Counting Streak Camera
Proceedings of SPIE (December 08 1986)

Back to Top