17 January 1990 Method For Analyzing The Flash X-Ray Spectra Using Attenuation Data
Author Affiliations +
X-ray spectra from a single-flash x-ray generator were determined by means of attenuation analysis using a new type of function fitting the bremsstrahlung spectra of the flash x-rays. These attenuation data were obtained by using a set of aluminum steps positioned at 1m from the source, while the x-ray detectors were the elements of a thermoluminescence dosimeter (TLD) which were placed behind the steps. The relative response function of the TLD element was also determined by using attenua-tion data achieved with the conventional hot cathode x-ray spectra measured with a spectrometer utilizing a lithium-drifted silicon detector. The flash x-ray generator was a single high-intensity type utilizing a hot cathode radiation tube used for biomedical radiography. This generator may be used for condenser charging voltages of less than 120kV; the pulse widths of the flash x-rays were less than 100ns. The peak intensities of the flash x-ray spectra tended to shift to the high energy region according to increases in the charging voltage and insertion of aluminum filters. The energy latitude of the flash x-ray spectra were wide compared to those obtained using a conventional x-ray generator used for medical radiography.
© (1990) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hiroshi Isobe, Hiroshi Isobe, Eiichi Sato, Eiichi Sato, Satoshi Kawasaki, Satoshi Kawasaki, Arimitsu Shikoda, Arimitsu Shikoda, Kei Takahashi, Kei Takahashi, Yoshiharu Tamakawa, Yoshiharu Tamakawa, Toru Yanagisawa, Toru Yanagisawa, } "Method For Analyzing The Flash X-Ray Spectra Using Attenuation Data", Proc. SPIE 1155, Ultrahigh Speed and High Speed Photography, Photonics, and Videography '89: Seventh in a Series, (17 January 1990); doi: 10.1117/12.962402; https://doi.org/10.1117/12.962402

Back to Top