The optical system design of broadband infrared imaging spectrometer

Yan-peng Fu; Hai-yang Wang; Xing-rui Jia; Jing-qian Ming; Wei-jian Zheng; Ning Jin; Xing Wang

doi:10.1117/12.2575208

10 October 2020 The optical system design of broadband infrared imaging spectrometer

Yan-peng Fu, Hai-yang Wang, Xing-rui Jia, Jing-qian Ming, Wei-jian Zheng, Ning Jin, Xing Wang

Proceedings Volume 11559, Infrared, Millimeter-Wave, and Terahertz Technologies VII; 1155910 (2020) https://doi.org/10.1117/12.2575208
Event: SPIE/COS Photonics Asia, 2020, Online Only

Conference Poster

Abstract

In order to achieve infrared imaging spectrometers for environmental gas monitoring in the medium-wave infrared and long-wave infrared spectra, meanwhile detecting the characteristic spectra of a variety of ambient gas molecules, it is necessary to do research on the design of the infrared wide spectrum (3.2μm～14μm) imaging spectrometers optical system with a large relative aperture. First of all, the lens power of reasonable distribution will be available by solving of the wide spectrum correcting chromatic aberrations equation and athermalization equation. Secondly, the list compares the common infrared optical material in the infrared wide spectrum dispersion characteristics and thermal characteristics differences, optimizes the three infrared optical materials of the Germanium single crystal, wide spectral Zinc sulfide, and Chalcogenide glass for transmission optical system design. Thirdly, using CODE V optical design software to optimize the optical parameters, the system uses four lenses, introduces four aspherical faces, the rest are spherical. Finally, the modeling gives the 3D layout of the system, and the image evaluation and tolerance analysis of the optical system are carried out. The results show that the modulation transfer function (MTF) value of the optical system at the spatial frequency 30lp/mm is greater than 0.5. The average square root (RMS) value of the diffused spot diameter is less than 17μm; The working band is 3.2μm ~14μm, F number 1, the optical system in the temperature range of -40°C ~+60 °C has a good imaging quality. The optical system has the characteristics of large relative aperture, wide working band, good process and compact structure, and can be used for 640×480 the infrared wide-spectral segment focal plane detector.

Citation Download Citation

Yan-peng Fu, Hai-yang Wang, Xing-rui Jia, Jing-qian Ming, Wei-jian Zheng, Ning Jin, and Xing Wang "The optical system design of broadband infrared imaging spectrometer", Proc. SPIE 11559, Infrared, Millimeter-Wave, and Terahertz Technologies VII, 1155910 (10 October 2020); https://doi.org/10.1117/12.2575208

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available