28 December 1989 Calibration And Performance Of The Ultraviolet Plume Instrument (UVPI)
Author Affiliations +
The Ultra Violet Plume Instrument (UVPI) will measure launch vehicle plume intensities, clutter and earth background in the near and mid UV. Two intensified CCD (ICCD) cameras are used to collect UV irradiance and guide the UVPI via its own pointing and tracking capability. Radiometric calibration provided correlation between video output and irradiance for the 16 intensifier gain levels while tracking optimization emphasized acquiring and tracking low level radiance sources. The science, or plume, camera obtains radiometric imagery in a 0.13° FOV using four selectable filters to cover a 220 to 340 nm bandpass. The tracker camera output drives gimbal servos and keeps the UV source within target FOV. The tracker has a 280 to 440 nm bandpass and 2.2° FOV. Reliable tracking was achieved with a target irradiance of 1 x 1044 watts/cm2.
© (1989) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Herbert W. Smathers, Herbert W. Smathers, George R. Carruthers, George R. Carruthers, William D. Ramsey, William D. Ramsey, George B. Steiner, George B. Steiner, W. Louissaint, W. Louissaint, } "Calibration And Performance Of The Ultraviolet Plume Instrument (UVPI)", Proc. SPIE 1158, Ultraviolet Technology III, (28 December 1989); doi: 10.1117/12.962545; https://doi.org/10.1117/12.962545


1-cm collimated source for use in infrared calibrations
Proceedings of SPIE (July 16 2000)
Final results of the PERSEE experiment
Proceedings of SPIE (September 11 2012)
The Multiple Mirror Telescope (MMT) Top Box
Proceedings of SPIE (August 19 1986)
Ultraviolet imager for ISTP
Proceedings of SPIE (June 28 1992)

Back to Top