|
Petroleum products are the largest source of energy in the world, accounting for over 30% [1]. The amount of oil production increases annually, as does the production of petroleum products. In 2015, 4181 million tons of petroleum products were manufactured, and in 2018, 4350 million tons were produced [2]. It becomes necessary to analyze oil and oil products to determine their quality. The traditional chemical method for analyzing crude oil and petroleum products requires a large number of instruments, as well as a lot of time and consumables [3-5]. To speed up the process of determining the quality of oil products, it is possible to perform spectral analysis using terahertz time-domain spectroscopy. The optical properties obtained using terahertz spectroscopy in the time domain of a petroleum product can be used to analyze its quality. At the moment, there are studies of crude oil for the presence of asphaltenes and their effect on the optical properties of crude oil [6]. The absorption coefficient spectrum of crude oil shows moderate absorption due to asphaltene with no clear indications, except for some narrow absorption lines, which are caused by water molecules adsorbed on the asphaltene. Other research focuses on petroleum products, namely oils, gasoline and diesel [7]. As a result, oils have a high absorption coefficient at high frequencies, the same results were observed for gasoline and diesel fuel. This work is devoted to the spectral analysis of a mixture of gasoline with an octane rating of 98 and diesel fuel, depending on the concentration of gasoline, using terahertz time-domain spectroscopy.
|
