15 January 1990 Investigation Of The Mechanical Behavior Of Low Strength Fibers
Author Affiliations +
Abstract
The mechanical reliability of long lengths of optical fibers is controlled by large flaws that occur so infrequently that they are unlikely to appear in the short lengths of fiber ordinarily tested in the laboratory. Current mechanical reliability predictions are based on data obtained from short lengths of high strength fiber, but there is some concern that these data may not apply to the critical, large flaw sections. We have produced long lengths of low strength fibers with narrow strength distributions by directing a jet of abrasive particles against the fiber surface before coating. Static and dynamic fatigue testing of the low strength fiber showed that the crack growth exponent, n, increased with decreasing strength. Since larger values of n are associated with slower crack growth, the use of smaller n values obtained from high strength fibers results in conservative reliability predictions.
© (1990) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
H. H. Yuce, H. H. Yuce, P. L. Key, P. L. Key, D. R. Biswas, D. R. Biswas, } "Investigation Of The Mechanical Behavior Of Low Strength Fibers", Proc. SPIE 1174, Fiber Optics Reliability: Benign and Adverse Environments III, (15 January 1990); doi: 10.1117/12.963251; https://doi.org/10.1117/12.963251
PROCEEDINGS
7 PAGES


SHARE
RELATED CONTENT

Aging behavior of low-strength fused silica fibers
Proceedings of SPIE (February 01 1991)
Static Fatigue Of Optical Fibers In Bending II Effect...
Proceedings of SPIE (January 01 1987)
Optical fiber reliability models
Proceedings of SPIE (September 08 1993)
Indentation experiments on silica optical fibers
Proceedings of SPIE (February 01 1991)

Back to Top