Paper
23 January 1990 Solution To OTDR Limitations For Automated Measurement
Eugene Edwards, Jack Horton, Paul B. Ruffin
Author Affiliations +
Abstract
An effective measurement method for investigating the transmission characteristics of an optical fiber segment using automated backscattering techniques is described in this paper. Three different Optical Time Domain Reflectometers (OTDRs) are employed in the manual and automated modes of operation to characterize several single mode fibers. Length dependent optical loss measurements are made on several precision-wound fiber optic bobbins (containing many layers) by setting the distance markers at the start and end locations which bound the desired fiber segment. Discrepancies are observed in the data acquired using the manual vs the automated procedure. Apparent round-off errors and inaccurate measurements are observed when operating the OTDR in the automated mode due to the elimination of the operator's observations and adjustments. Algorithms are written to automatically frame the fiber segment of interest by monitoring the actual OTDR marker settings and adjusting the marker setting request(s) when the fiber segment boundaries are violated by the OTDR. This novel framing technique ensures consistent and precise measurements. The technique can provide assistance in using OTDRs in the automated mode of operation.
© (1990) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Eugene Edwards, Jack Horton, and Paul B. Ruffin "Solution To OTDR Limitations For Automated Measurement", Proc. SPIE 1180, Tests, Measurements, and Characterization of Electro-Optic Devices and Systems, (23 January 1990); https://doi.org/10.1117/12.963453
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Optical fibers

Distance measurement

Fiber optics

Electro optics

Fiber optics tests

Missiles

Signal attenuation

Back to Top