Paper
23 August 2021 Hydrogen damage and cleaning evaluation of Mo/Si multilayer using high-power EUV irradiation tool
Tetsuo Harada, Ayato Ohgata, Shinji Yamakawa, Takeo Watanabe
Author Affiliations +
Abstract
At EUV lithography, an EUV mirror can be easily contaminated with carbon. This carbon contamination causes the reflectance drop of the Mo/Si multilayer mirror. For the carbon-contamination cleaning, hydrogen gas is introduced at a pressure of a few Pascal in the EUV exposure tool. However, during this process, the hydrogen damage would be caused on a Mo/Si multilayer, which would decrease EUV reflectance of the multilayer. The cleaning rate and damage threshold of hydrogen pressure and EUV dose were not well known. Therefore, an EUV irradiation tool in hydrogen atmosphere is developed and installed at the BL09 beamline of the NewSUBARU synchrotron light facility to evaluate the irradiation durability and cleaning effect of the Mo/Si multilayer under these conditions. The EUV-irradiation intensity was up to 6 W/cm2, and hydrogen pressure was up to 70 Pa. The contamination was occurred at the low-hydrogen-pressure conditions from 0 to 5 Pa. The contamination was not occurred at the high-hydrogen-pressure condition of 20 and 68 Pa. In addition, the sample with many particles on the surface was damaged by the EUV-induced plasma.
© (2021) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Tetsuo Harada, Ayato Ohgata, Shinji Yamakawa, and Takeo Watanabe "Hydrogen damage and cleaning evaluation of Mo/Si multilayer using high-power EUV irradiation tool", Proc. SPIE 11908, Photomask Japan 2021: XXVII Symposium on Photomask and Next-Generation Lithography Mask Technology, 119080U (23 August 2021); https://doi.org/10.1117/12.2601080
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
Back to Top