Process stabilization through pulsed laser-induced melt pool shaping in dual-beam LMD

Marius Gipperich; Stefan Gräfe; Robin Day; Thomas Bergs

doi:10.1117/12.2606192

4 March 2022 Process stabilization through pulsed laser-induced melt pool shaping in dual-beam LMD

Marius Gipperich, Stefan Gräfe, Robin Day, Thomas Bergs

Proceedings Volume 11992, Laser 3D Manufacturing IX; 119920A (2022) https://doi.org/10.1117/12.2606192
Event: SPIE LASE, 2022, San Francisco, California, United States

Abstract

Laser Metal Deposition (LMD) is an additive manufacturing process that reaches high deposition rates. Its applications are mainly found in repair, cladding and manufacturing. The two commonly used LMD processes are powder-based (LMDp) and wire-based (LMD-w). Despite the fact that wire-based LMD uses material more efficiently, its process stability is a major concern. One approach to increase the process stability is superposing a pulsed laser (pw) beam with the conventionally used continuous laser (cw). Previous studies have shown that the metal vapor caused by pulsed laserinduced evaporation in the process zone significantly improves energy absorption. Furthermore, a direct relation between vapor pressure and melt pool form has been demonstrated. In this contribution, we correlate the pw-controlled melt pool geometry to process stability. High-speed camera imaging is employed to evaluate the dynamic melt pool behavior as a function of pw frequency and power. It is shown that irregular melt pool oscillations impairing process stability in conventional LMD-w are reduced if the pulsed laser is added. The melt front is shaped depending on the acting pw-induced pressure. This leads to a more stable interaction between wire and melt pool. Furthermore, the pw pressure changes the welding bead height and width. This cross-sectional geometry has an impact on the resulting waviness in 3D build-up. We also investigate how the waviness influences process stability during multilayer LMD-w. The results demonstrate that the dual beam technology is a promising way to develop more reliable and resource-efficient AM processes.

Conference Presentation

Citation Download Citation

Marius Gipperich, Stefan Gräfe, Robin Day, and Thomas Bergs "Process stabilization through pulsed laser-induced melt pool shaping in dual-beam LMD", Proc. SPIE 11992, Laser 3D Manufacturing IX, 119920A (4 March 2022); https://doi.org/10.1117/12.2606192

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available