Translator Disclaimer
1 May 1990 Improvement in a volume hologram characteristic for application to a laser scanner
Author Affiliations +
Proceedings Volume 1212, Practical Holography IV; (1990)
Event: OE/LASE '90, 1990, Los Angeles, CA, United States
A volume hologram has an advantage in regard to productivity and diffraction efficiency for a holographic optical element (HOE). However, reconstruction beam characteristics for the hologram are influenced by product process conditions, and they deteriorate when keep illuminating by high power light and held in a high temperature ambient. For this reason, the volume hologram has not been used for the HOE practically. This paper report the causes of these probrems and their countermeasures. First, a reconstructed beam angle from the hologram was measured very accurately by a newly designed instrument. From this measurement result, it was found that there was a difference between diffraction angle value, estimated from Kogelnik's theory, and the measured value in an off-Bragg's incident beam angle condition. Next, a variation between hologram characteristics was assumed to be caused by recording emulsion deformation in a development process. The deformation was measured, using a spectrometer and a scanning tunneling microscope (STM) . To improve the efficiency deterioration, haloid gas was permeated into the emulsion, and the emulsion was sealed between glass plates. Finaly, the authors attempted to make a laser scanner with the volume hologram. Due to the improvements, beam spot size became below 200,urn through a 200mm scanning range.
© (1990) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hiromi Suzuki and Akira Ono "Improvement in a volume hologram characteristic for application to a laser scanner", Proc. SPIE 1212, Practical Holography IV, (1 May 1990);


Back to Top