1 June 1990 Intense high-repetition-rate excimer lasers and applications
Author Affiliations +
Proceedings Volume 1225, High-Power Gas Lasers; (1990) https://doi.org/10.1117/12.18483
Event: OE/LASE '90, 1990, Los Angeles, CA, United States
Abstract
Building of high average output power excimer lasers requires the solution of several complex problems. The main challenge is the creation of a uniform discharge which can be easily reproduced even at high pulse repetition rates. Some approaches to solving this problem are discussed. They resulted in creation of lasers with aperture of 4 sq cm operating at 1 kHz producing the output of 420 W at 308 nm. A large-aperture XeCl laser can produce 10 J per pulse at 50 Hz.
© (1990) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Vladimir Yu. Baranov, Vladimir M. Borisov, Aleksandr Yu. Vinokhodov, Yu. B. Kiryukhin, Yu. Yu. Stepanov, Oleg B. Khristoforov, "Intense high-repetition-rate excimer lasers and applications", Proc. SPIE 1225, High-Power Gas Lasers, (1 June 1990); doi: 10.1117/12.18483; https://doi.org/10.1117/12.18483
PROCEEDINGS
9 PAGES


SHARE
RELATED CONTENT

Progress in discharge-pumped excimer lasers
Proceedings of SPIE (April 19 1993)
UV-laser-produced plasma in gases and on metal targets
Proceedings of SPIE (May 29 2001)
Long-life 2kHz x-ray preioniser
Proceedings of SPIE (August 16 1994)
Wide-aperture electric-discharge XeCl lasers
Proceedings of SPIE (May 03 2004)

Back to Top