1 April 1990 Influence of beam loading on the operation of the relativistic klystron amplifier
Author Affiliations +
Proceedings Volume 1226, Intense Microwave and Particle Beams; (1990) https://doi.org/10.1117/12.18539
Event: OE/LASE '90, 1990, Los Angeles, CA, United States
Experiments in modulating an electron beam of power greater than 30 GW revealed a mechanism that limits the output RF power of the NRL relativistic klystron amplifier. This mechanism is beam loading of high voltage gaps. It is found that the presence of charge at the gaps is analogous to connecting a capacitor in parallel with the HV gap. This capacitor has a component that depends only on the electron density and on the geometry. Its presence causes detuning of the cavity, resulting in a slow build-up time for the electron beam modulation, saturation of the RF current amplitude and occasionally erratic fluctuations in the RF current. The nonlinear components of this capacitor cause the spectrum of the current modulation to be shifted toward the high frequencies.
© (1990) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Moshe Friedman, Moshe Friedman, Victor Serlin, Victor Serlin, Denis G. Colombant, Denis G. Colombant, Jonathan Krall, Jonathan Krall, Yue Ying Lau, Yue Ying Lau, } "Influence of beam loading on the operation of the relativistic klystron amplifier", Proc. SPIE 1226, Intense Microwave and Particle Beams, (1 April 1990); doi: 10.1117/12.18539; https://doi.org/10.1117/12.18539

Back to Top