1 July 1990 Median-based feature selective filtering
Author Affiliations +
Proceedings Volume 1247, Nonlinear Image Processing; (1990); doi: 10.1117/12.19597
Event: Electronic Imaging: Advanced Devices and Systems, 1990, Santa Clara, CA, United States
Abstract
The design of a linear filter is quite straight forward especially if the spectra of the required and unwanted signals are known and do not overlap with each other. Basically, a linear filter is implemented by tuning its passband to the required signal and adjusting its stopband to the unwanted signal. However, in case of two or higher dimensional image filtering, we normally only have knowledge about the shape of the unwanted feature and have little or no knowledge about its spectrum. For non-linear filters such as the 2-D standard median filters, their filtering characteristics can only be roughly controlled by the size and the shape of the filter window. The unwanted feature cannot be specified in details and hence some related but required features may also be removed. In this paper, a novel median based feature selective filtering technique is introduced. Unwanted features of any particular shape can be specified in details by a set of custom-tailored shells and all features, other than those specified features which are to be removed, can be preserved regardless of feature orientations. In particular, this technique can be used to remove very high density impulsive noise from corrupted images.
© (1990) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jim Li, "Median-based feature selective filtering", Proc. SPIE 1247, Nonlinear Image Processing, (1 July 1990); doi: 10.1117/12.19597; https://doi.org/10.1117/12.19597
PROCEEDINGS
12 PAGES


SHARE
KEYWORDS
Digital filtering

Nonlinear filtering

Image filtering

Linear filtering

Nonlinear image processing

Binary data

Image processing

Back to Top