Presentation + Paper
28 April 2023 Transparent PDMS fiber actuator with ionic liquid-based electrodes
Author Affiliations +
Abstract
Fiber dielectric elastomer actuators (DEAs) are potential candidates for the realization of artificial muscles owing to, amongst others, their linear actuation principle. In this work, a polydimethylsiloxane (PDMS) hollow fiber is prepared through a spinning method using the photocurable thiol-ene reaction between a thiol (R-SH) group and a double bond (C=C). The developed PDMS hollow fiber has an external diameter of 463 μm and uniform wall thickness of 78 μm, and presents tensile properties of ~600 % strain at break and 0.22 MPa strength, compared to these of the planar film of 86 % strain at break and 0.14 MPa tensile strength. Fiber DEAs are prepared by using ionic liquid as an inner electrode and ionogel as an electrical outer sheath. Due to the highly transparent PDMS elastomer layer and ionic liquid-based electrodes, the fiber DEA presents a transparency of ~91 % in a visible light spectrum. The fiber DEA exhibits a large linear strain of 9 % at 50 V/μm. Furthermore, the fiber DEA can be assembled into bundles for increased forces. The work presented herein provides a pathway for creating active soft matter with complex architectures to enable fast programmable actuation for multiple applications including invisible robots.
Conference Presentation
© (2023) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhaoqing Kang, Liyun Yu, and Anne Ladegaard Skov "Transparent PDMS fiber actuator with ionic liquid-based electrodes", Proc. SPIE 12482, Electroactive Polymer Actuators and Devices (EAPAD) XXV, 1248205 (28 April 2023); https://doi.org/10.1117/12.2655769
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Polydimethylsiloxane

Actuators

Dielectric elastomer actuators

Electrodes

Transparency

Back to Top