Paper
1 August 1990 Modulator-induced streaking artifact in laser film printer images
Author Affiliations +
Proceedings Volume 1254, Optical Hard Copy and Printing Systems; (1990) https://doi.org/10.1117/12.19844
Event: Electronic Imaging: Advanced Devices and Systems, 1990, Santa Clara, CA, United States
Abstract
The visibility of the modulatorinduced streaking artifact in the images from a laser film printer has been observed and analyzed. These streaks which occur in the printing of a light (low density) area after the printing of a dark (high density) area can be ascribed to the reflection of acoustic power in the acoustooptic modulator. By comparing the fractional transmission change in the light area (due to the reflection of acoustic power used for the printing of the dark area) with a visual threshold contrast the visibility of streaks can be determined. These results are found to be in good agreement with experiments. Specifications on the maximum acoustic reflection coefficient for the suppression of streaking visibility are also given. 1.
© (1990) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kwok Leung Yip, David Kessler, and Scott J. Daly "Modulator-induced streaking artifact in laser film printer images", Proc. SPIE 1254, Optical Hard Copy and Printing Systems, (1 August 1990); https://doi.org/10.1117/12.19844
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Modulators

Nonimpact printing

Printing

RELATED CONTENT

Internal Drum Laser Scanning Plate Exposure System
Proceedings of SPIE (April 23 1979)
Laser Printers In The Word Processing Environment
Proceedings of SPIE (April 23 1979)
Optical System Design For A Laser Printing System
Proceedings of SPIE (September 20 1982)
Optical-Mechanical Design Of The IBM 6670 Laser Printhead
Proceedings of SPIE (February 12 1980)
Optical systems for laser thermal printing
Proceedings of SPIE (September 29 2004)

Back to Top