Paper
1 May 1990 Comparison of projection and proximity printings--from UV to x ray
Author Affiliations +
Abstract
Projection and proximity printings are compared in terms of linewidth tolerance. Computer simulated exposure-defocus and gap-exposure diagrams are used to characterize the two techniques respectively. The depth of focus for projection printing in terms of the universal depth parameter k2 is evaluated as a function of the universal width parameter k1, for five long and short representative lithographic features, then three long features. Similarly, the depth of focus and working distance for proximity printing are evaluated for a O.25-jm system in x-ray and 2.5-,um system in uv and some preliminary comparison to experimental results is shown. The image contours and depth of focus of the two imaging techniques are compared. Proximity effects are present for both techniques. The distinction of working distance and depth of focus for proximity printing is observed for the first time. Against intuition, a shorter mask-to-wafer gap is not always better.
© (1990) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Burn Jeng Lin "Comparison of projection and proximity printings--from UV to x ray", Proc. SPIE 1263, Electron-Beam, X-Ray, and Ion-Beam Technology: Submicrometer Lithographies IX, (1 May 1990); https://doi.org/10.1117/12.20147
Lens.org Logo
CITATIONS
Cited by 9 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Printing

X-rays

X-ray technology

Tolerancing

Lithography

X-ray lithography

Photomasks

RELATED CONTENT

Near-field x-ray lithography to 15 nm
Proceedings of SPIE (May 20 2004)
SOR Lithography in West Germany
Proceedings of SPIE (August 01 1989)

Back to Top