Paper
1 August 1990 Remote flammable-gas sensing using a fluoride-fiber evanescent probe
Author Affiliations +
Proceedings Volume 1267, Fiber Optic Sensors IV; (1990) https://doi.org/10.1117/12.20294
Event: The International Congress on Optical Science and Engineering, 1990, The Hague, Netherlands
Abstract
Evanescent wave spectroscopy at 3.3gm on the surface of the core of an IR transmitting fluoride fibre is used to detect the concentration of flammable gases such as propane or methane in the environment of the fibre. Three probe designs are discussed. In one the gas diffuses through the teflon cladding of a multimode fibre causing an attenuation of the evanescent field and thereby a reduction in transmittance of the fibre. In the second a short section of cladding is removed from multimode fibre to access the evanescent field region. In the third singlemode fibre is used with its cladding reduced locally by polishing. Referencing is carried out at non absorbing wavelengths in the 3.2 to 3.6pm region.
© (1990) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Vincent P. Ruddy, Brian D. MacCraith, and Simon P. McCabe "Remote flammable-gas sensing using a fluoride-fiber evanescent probe", Proc. SPIE 1267, Fiber Optic Sensors IV, (1 August 1990); https://doi.org/10.1117/12.20294
Lens.org Logo
CITATIONS
Cited by 7 scholarly publications and 2 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Cladding

Methane

Signal attenuation

Remote sensing

Spectroscopy

Fiber optics sensors

Absorbance

RELATED CONTENT


Back to Top