Fiber optic based chemical sensors for in-situ measurement of metals   and aromatic organic compounds in seawater and soil systems

Stephen H. Lieberman; Scott Inman; Gregory A. Theriault; Stafford S. Cooper; Philip G. Malone; Yasuhiro Shimizu; Paul W. Lurk

doi:10.1117/12.20353

1 August 1990 Fiber-optic-based chemical sensors for in-situ measurement of metals and aromatic organic compounds in seawater and soil systems

Stephen H. Lieberman, Scott Inman, Gregory A. Theriault, Stafford S. Cooper, Philip G. Malone, Yasuhiro Shimizu, Paul W. Lurk

Author Affiliations +

Proceedings Volume 1269, Environment and Pollution Measurement Sensors and Systems; (1990) https://doi.org/10.1117/12.20353
Event: The International Congress on Optical Science and Engineering, 1990, The Hague, Netherlands

Abstract

Use of UV-visibletransmitting optical fibers for real-time, remote, in situfluorescencemeasurementsof chemical constituents in environmental samples is described. In order to improve the capability of fluorescence techniques for resoMng complex mixtures we have deVelOped a fiber optic-based system that uses a pulsed nrogen laser to induce fluorescence and a time-gated linear photodiode array coupled to a spectrograph for measuring resutting emisalon spectra This permfts rapid extraction of both spectral information and temporal data (fluorescence decay times). The performance of the system for monftoring aromatic hydrocarbons directly in seawater over a bare-ended" fiber optic cable is discussed. Techniques for extending the Capability to determination of metals and other non-fluorescing compounds are presented. A system in which a fluorogenic indicator molecule for metal ions is constantly renewed at the sensing end of the fiber is described that (1)exhibits very fast response times (1 second) and (2)eliminates problems of reversibility common with immobilized indicators. Presently, the pulsed-laser/photodiode fiber optic system is being adapted to a truck-mounted cone penetrometer system for characterizing the distribution of chemical contaminants at hazardous waste sites. The system can push a 35.7 mm diameter rod up to 50 m into the sI at a rate of approximately 2 cm/sec. The penetrometer probe tip will be equipped with sapphire viewing windows that permft one fiber to screen for aromatic orgarc compounds and a fluorogeruc indicator release system that can be used with a second fiber for trace metal screening.

Citation Download Citation

Stephen H. Lieberman, Scott Inman, Gregory A. Theriault, Stafford S. Cooper, Philip G. Malone, Yasuhiro Shimizu, and Paul W. Lurk "Fiber-optic-based chemical sensors for in-situ measurement of metals and aromatic organic compounds in seawater and soil systems", Proc. SPIE 1269, Environment and Pollution Measurement Sensors and Systems, (1 August 1990); https://doi.org/10.1117/12.20353

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE