1 October 1990 Application of a commercially available thermal imager to a film-cooled panel temperature measurement
Author Affiliations +
Proceedings Volume 1320, Infrared Technology and Applications; (1990) https://doi.org/10.1117/12.22331
Event: Eighth International Conference Infrared Technology and Applications, 1990, London, United Kingdom
Abstract
An AGEMA 870 thermal imaging system has been used to measure the temperature of a film cooled panel in a hot duct, ventilated by flowing air at atmospheric pressure. To avoid detecting radiation from these gases, it proved necessary to view the panel through a narrow bandpass filter centred on 3.95im. The thermography results failed to agree with spot thermocouple measurements until changes were made to both the experimental and calculation procedures. The paper describes these changes and the calculation algorithms used to calibrate the system, account for non-uniform ambient radiation and eliminate the distortion produced by the wide angle lens.
© (1990) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
T. J. Meddings, T. J. Meddings, Christopher W. Wilson, Christopher W. Wilson, } "Application of a commercially available thermal imager to a film-cooled panel temperature measurement", Proc. SPIE 1320, Infrared Technology and Applications, (1 October 1990); doi: 10.1117/12.22331; https://doi.org/10.1117/12.22331
PROCEEDINGS
12 PAGES


SHARE
RELATED CONTENT

Challenges in IR system testing
Proceedings of SPIE (October 16 1994)
Thermographic calibration of graybody objects
Proceedings of SPIE (February 28 1990)
Applications for high-speed infrared imaging
Proceedings of SPIE (March 16 2005)
Laboratory Characterization Of Calibrated Thermal Imagers
Proceedings of SPIE (August 04 1986)
Wood crib fire free burning test in ISO room
Proceedings of SPIE (April 17 2006)

Back to Top