1 October 1990 Thermodynamic inspection of concrete using a controlled heat source
Author Affiliations +
Proceedings Volume 1320, Infrared Technology and Applications; (1990) https://doi.org/10.1117/12.22358
Event: Eighth International Conference Infrared Technology and Applications, 1990, London, United Kingdom
Abstract
Concrete is not quite such a non-destructable material as many are led to believe. It can deteriorate with time due to changes in the chemistry, the effect of moisture penetration and the corrosion of reinforcing steel bars. Much of this damage occurs relatively close to the surface, sometimes revealed by discolourations or the presence of cracks and sometimes as spallation when the corrosion products of steel cause delamination of the near surface concrete. These effects may occur in good quality concrete but their severity and rapidity of onset may be enhanced by fabrication defects when aggregates may not be to specification or the packing conditions cause porosity. It may thus be months or even years afterwards that these defects come to light. As a consequence a new industry has been formed to inspect concrete structures which may include X-ray equipment, linac accelerators, gamma isotope sources, ultrasonics, radar and of course thermography. Each of these nethods will have their own particular attractive features and merits. But most of these activities tend to be used more as a "fire fighting" service than as one ensuring regular maintenance of critical structures or even as quality control of structures during building. Quite often it seems that Non-destructive Testing is turned into a litigation service for dissatisfied customers and thermography is no stranger to this topic. It is heartening to see that the ASTM organisation in the USA and British Standards are encouraging and developing suitable standards for the inspection of concrete by thermographic techniques.
© (1990) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
James M. Milne, "Thermodynamic inspection of concrete using a controlled heat source", Proc. SPIE 1320, Infrared Technology and Applications, (1 October 1990); doi: 10.1117/12.22358; https://doi.org/10.1117/12.22358
PROCEEDINGS
15 PAGES


SHARE
Back to Top