Circumferential and inner diameter metrology for the Advanced X-ray Astrophysics Facility optics

Thomas E. Gordon

doi:10.1117/12.22808

1 November 1990 Circumferential and inner diameter metrology for the Advanced X-ray Astrophysics Facility optics

Thomas E. Gordon

Author Affiliations +

Proceedings Volume 1333, Advanced Optical Manufacturing and Testing; (1990) https://doi.org/10.1117/12.22808
Event: 34th Annual International Technical Symposium on Optical and Optoelectronic Applied Science and Engineering, 1990, San Diego, CA, United States

Abstract

The Advanced X-Ray Astrophysical Facility (AXAF) is part of NASA's Great Observatory program, and is scheduled for launch in the late 1 990's. A Wolter Type I grazing incidence telescope, it is planned to study high energy astronomical phenomena which emit in the x-ray spectrum from 0.1 -1 0 KeV (1 24 - 1 .24 A). The telescope consists of 6 nested, confocal parabola/hyperbola pairs, with the conic figure polished on the inside surfaces of cylindrical substrates. The 1 2 cylindrical elements are 1 meter in length and range in diameter from 0.5 - 1.2 meters. The specifications for the AXAF optics place strict requirements on the metrology instrumentation used to guide the fabrication process; in general, the accuracy of the measurements must be an order of magnitude better than the quality of the finished product. This is true for each of the measured parameters, which include axial figure, circumferential figure, inner diameter, and surface microroughness. Axial figure, circumferential figure, and inner diameter data are used to form maps of the inside surface of the optics, and form the basis for the subsequent fabrication cycle. Surface microroughness is used to determine the scattering performance of the system. This paper describes the facility used for the measurement of circumferential figure and inner diameter. This facility, the Circularity and Inner Diameter Station (CIDS), measures inner diameters of over 40 inches to within 70 microinches and acquires circularity data which is accurate to better than 1 microinch rms after averaging and the removal of systematic errors.

Citation Download Citation

Thomas E. Gordon "Circumferential and inner diameter metrology for the Advanced X-ray Astrophysics Facility optics", Proc. SPIE 1333, Advanced Optical Manufacturing and Testing, (1 November 1990); https://doi.org/10.1117/12.22808

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE