1 January 1991 Design and fabrication of x-ray/EUV optics for photoemission experimental beam line at Hefei National Synchrotron Radiation Lab.
Author Affiliations +
Abstract
All optics for five beam lines of Hefei National Synchrotron Radiation Laboratory the second synchrotron accelerator of Chinabuiltsuccessfully are designed and fab ricated almost by Changchun Institute of Opticsand Fine Mechanics. One of five beam lines is a Photoemission experimental beamline. Its optical system consists of two sets of spherical mirrors a spherical grating monochromator and two cylindrical ml rrors. Energy covering range of the system is lOeVl000eV. This paper describts de sign and fabrication of two sets of mirrors with large radii (89meter and 5lrneter). Dimension of fabricated surface of optics is 310X60 mm surface roughness of it Is less than bA RMS figuring accuracy of it is )/1 0 The system operats at bA-i iooA and grazing incidence angle Is 3 degrees. All optics are made of Zerodur. Vertical and horizontal acceptance angles are 2. 5mrad and 20 mrad. respectively. Four mirrors with the same radius (89t of five mirror are arranged straight in a row along the length. The mirrors are able to be used as a toroidal mirror with large dimension (4x3lOmrn) as relative positions of them are adjusted respectively. The design idea of the optical system has novel and unique feature. Fabrication of all xray/EUV op tics for beamline can meet requirements as mentiond above and the optlca have been assembled successfully in the synchrotron radiation beamline and used for photo emission experiment.
© (1991) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Changxin Zhou, Deming Sun, "Design and fabrication of x-ray/EUV optics for photoemission experimental beam line at Hefei National Synchrotron Radiation Lab.", Proc. SPIE 1345, Advanced X-Ray/EUV Radiation Sources and Applications, (1 January 1991); doi: 10.1117/12.23323; https://doi.org/10.1117/12.23323
PROCEEDINGS
7 PAGES


SHARE
RELATED CONTENT

Fabrication and testing of large flats
Proceedings of SPIE (September 14 2007)
Low-temperature bonding of lightweight mirrors
Proceedings of SPIE (December 12 2003)
Fabrication of Wolter type I mirror for soft x-ray
Proceedings of SPIE (October 20 1992)

Back to Top