1 April 1991 Experimental investigation on the flow behavior of liquid aluminum inside pressure-die-casting dies using high-speed photography
Author Affiliations +
Proceedings Volume 1358, 19th Intl Congress on High-Speed Photography and Photonics; (1991) https://doi.org/10.1117/12.24089
Event: 19th International Congress on High-Speed Photography and Photonics, 1990, Cambridge, United Kingdom
Abstract
An experimental investigation on the flow behavior of molten aluminium inside the pressuredie-casting dies for manufacturing electric motor rotors by using flow visualization and high speed photography is reported in this paper. The experiments were in fact carried out on several models made of organic glass, in which water instead of liquid aluminium was adopted as the test liquid by virtue of the principle of dynamic similitude in hydraulics. The observed results obtained from the models show a reasonable agreement with those from corresponding prototypes, and therefore provide a valuable scientific basis for the design of the casting dies, and for the selection of technological parameters of the pressuredie-casting and further theoretical analysis.
© (1991) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xuping Jiang, Xuping Jiang, Guobin Wu, Guobin Wu, } "Experimental investigation on the flow behavior of liquid aluminum inside pressure-die-casting dies using high-speed photography", Proc. SPIE 1358, 19th Intl Congress on High-Speed Photography and Photonics, (1 April 1991); doi: 10.1117/12.24089; https://doi.org/10.1117/12.24089
PROCEEDINGS
8 PAGES


SHARE
RELATED CONTENT

Advanced Heat Pipes For Optical Applications
Proceedings of SPIE (December 25 1984)
Micromachined flow-handling components: micropumps
Proceedings of SPIE (November 17 1999)
The granular mixing in a slurry rotating drum
Proceedings of SPIE (April 14 2010)
Improving The Making Of Powder Of RE Si Ferroalloy Using...
Proceedings of SPIE (January 16 1990)
14-in. advanced erasable optical disk development
Proceedings of SPIE (July 31 1990)

Back to Top