1 February 1991 Comparison of transient analog data fiber optic links
Author Affiliations +
Proceedings Volume 1371, High-Frequency Analog Fiber Optic Systems; (1991) https://doi.org/10.1117/12.24875
Event: SPIE Microelectronic Interconnect and Integrated Processing Symposium, 1990, San Jose, United States
Abstract
A comparison was conducted of fiber optic links for use in electromagnetic environments. Determining which link is optimum for a particular application is dependent on the environment''s electromagnetic bandwidth and amplitude. the device under test the frequency range of interest the environmental conditions and the link''s characteristics. If electromagnetic parameters tested device and environment cannot be altered the link must be adaptable to the device in its environment and operate over the required frequency range. The comparison determined the bandwidth. magnitude linearity versus frequency and temperature risetime signal-to-harmonic ratio and relative merits of each link. The Nanofast 0P300-2A was judged to be the outstanding low radio frequency (RF) FOL. It had a consistant upper 3 dB point (BW ) of 250 MHz and minimum ripple with changing gain: a near linear temperature versus BWU with minimum ripple: a risetime between 1. 7 is and 2. 1 s and a SHR of 42 dB. For high RF use the EOD Sentinal 1000 was the FOL of choice because of its: consistant 1 GH: BWU and low magnitude ripple coefficient with changing gain and temperature a risetime of 0. 5 its and SHR 47 dB.
© (1991) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Wallace T. Clark, K. W. Darrow, and Mike C. Skipper "Comparison of transient analog data fiber optic links", Proc. SPIE 1371, High-Frequency Analog Fiber Optic Systems, (1 February 1991); doi: 10.1117/12.24875; https://doi.org/10.1117/12.24875
PROCEEDINGS
8 PAGES


SHARE
Advertisement
Advertisement
Back to Top